Installing a Brick Paver Walkway or Concrete Masonry Bricks

The usage of Bricks or Pavers to create a walkway or patio area matches a house in a method that is unrivaled. In addition, installing a Brick or Paver walkway does not necessarily need a pro.

The key to setting up a Brick or Paver Walkway is to very first effectively prepare the area where the bricks/pavers are to be set up. In addition, string lines need to be strung on each side of the pathway.
When the area has actually been dug, 3/4" gravel stone should be laid in and tamped down securely. Then 2" of sand, or stone dust ought to be spread over the gravel. Again the sand/stone dust need to be tamped down. Stone dust is chosen. The height in between the tamped down sand and the stringline should equal the density of the brick or paver.

Now that you have a steady base, put a 1" pipe or ledger board the length of the walkway on either side of the walkway. Using a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will produce a level area to lay the bricks/pavers.

Now place on the level sand/stone dust strips of plastic brick borders. Install a run on both sides of the ready area. These strips will act as your pathway border and aid to keep the integrity and shape of the sidewalk.

The secret to laying the bricks/pavers is to guarantee that they interlock with each other. Always stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will once again help preserve the integrity of the sidewalk.

Inevitably bricks/pavers will need to be cut or divided when developing the walkway. To really cut/split the brick/paver, lay it in a bed of sand and place the sculpt at a 75 degree angle over the area where you want to break the brick. If your pathway has curves you will need to buy/rent a wetsaw.

After here setting up the bricks, develop the outside edges with additional sand, and after that shovel in the topsoil and load down securely.
Spread stone dust over the new walkway and sweep into the cracks. Repeat this process a couple of times to guarantee the cracks are completely filled. This will complete the interlocking of the bricks and assist to remove any weed development. Just include turf seed to the outside edges and you need to have a gorgeous entrance to your house within a number of weeks.


In addition, installing a Brick or Paver sidewalk does not necessarily require a pro. The key to installing a Brick or Paver Walkway is to very first appropriately prepare the area where the bricks/pavers are read more to be installed. Now that you have a steady base, position a 1" pipe or ledger board the length of the sidewalk on either side of the walkway. These strips will act as your sidewalk border and aid to preserve the integrity and shape of the walkway. Inevitably bricks/pavers will need to be cut or divided when building the sidewalk.

Leave a Reply

Your email address will not be published. Required fields are marked *